Walls That Tell a Story.
From mineral paint systems to stone cladding and decorative panels.
Walls are the canvas of every space. EdgeForm's wall finishes range covers structural application through to final decorative surface, including textured paints, PVC panels, and natural stone cladding.
12 Products
Showing 1–10 of 12
Premium Interior Emulsion — 20L
Premium interior emulsion available in matt, silk, and gloss finishes. Scrubbable, low-VOC formula.
Coverage
12–14m²/L
Finish
Matt/Silk/Gloss
Coats
2 coats
Washable
Yes
Exterior Masonry Paint — 20L
Elastomeric exterior masonry paint with micro-filler technology for crack bridging and waterproofing.
Coverage
8–10m²/L
Finish
Smooth / Textured
UV
UV stable
Water
Waterproof
Alkali Resisting Primer — 20L
Essential first coat for new plaster and concrete substrates. Neutralises alkali, seals surface porosity.
Coverage
10–12m²/L
Base
Water-based
Substrate
New plaster/concrete
Drying
2 hours
Venetian Plaster — Decorative Finish
Trowel-applied lime-based decorative plaster achieving a polished marble-effect surface. Interior use.
Finish
Marble effect
Application
Trowel applied
Sheen
High polish
Area
Interior
Designer Wallpaper — Geometric
Geometric pattern vinyl-coated wallpaper. Grade 3 washable for kitchens and dining rooms.
Width
530mm roll
Repeat
Straight 64cm
Type
Vinyl coated
Washable
Grade 3
PVC Wall Panel — Marble Effect 2400×600mm
High-gloss PVC wall panels with marble effect. Waterproof, easy to install and clean.
Size
2400×600mm
Thickness
10mm
Finish
High gloss
Waterproof
Yes
MDF Fluted Wall Panel — 2400×600mm
Premium MDF fluted panels for feature walls. Supplied primed and ready to paint.
Size
2400×600mm
Thickness
18mm
Finish
Primed/Paintable
Pattern
Fluted
Solid Wood Wall Panel — Rustic Oak
Solid rustic oak wall cladding panels. Tongue-and-groove installation, natural oiled finish.
Material
Solid oak
Width
120mm
Thickness
18mm
Finish
Natural oiled
Natural Slate Cladding Panel
Natural stone cladding panels for feature walls and exterior facades. Self-adhesive mesh backing.
Material
Natural slate
Panel
600×300mm
Thickness
10–15mm
Application
Interior/Exterior
Brick Slip Cladding — Red Multi
Genuine fired clay brick slips for feature walls. Authentic brick appearance without structural requirement.
Size
215×65mm
Thickness
20mm
Colour
Red multi
Area
Interior/Exterior